Home » Archive

Articles in the Product Review Category

4-Wheel Automotive, Do It Your Self (DIY) - Risk will be your own, Featured, Headline, Performance, Product Review »

[24 Feb 2013 | No Comment | 4,939 views]
Swirl Effect “Black Edition” series.

Dear All,
 
after previous explanation on Swirl effect device topic, so i can say it for this “Black Edition” series is smart inovation in creating swirl effect more better.  This “Black Edition” physically  more longer, if compare with prevoius version.
 
what i feel after i install this black edition, some improvement you can feel directly.
1.  Boost more feel in below 2,000 rpm. around 1,800 rpm.
2.  Fell the 2nd boost in 2,400 rpm.  This boost you can feel more bigger.
3.  And above 2,400 you can feel the acceleration much better.  in every rpm …

2-Wheel Automotive, Do It Your Self (DIY) - Risk will be your own, Electrical Motorcyle, Featured, Headline, Product Review »

[28 Jan 2013 | No Comment | 19,158 views]
How To Install “Yamaha Vixion” Left Handle Switch in to “Honda CB150R”.

Currently,
all new motorcyle already equipt with “Automatic Headlamp On”, and mostly call it AHO.
This is good for safety reason, but somehow when we ride on night, near neighboorhood, it can make trouble.
So, i just try to utilize “Yamaha Vixion” Left swicth that  have Lamp switch can be turn on/off.
Next i will share some simple add to turn on/off city lamp utilize “Yamaha Vixion” Switch that already have inside.
but it only work for front city lamp, for back city lamp it also can be done, but need long cable to connect.
So …

4-Wheel Automotive, Do It Your Self (DIY) - Risk will be your own, Featured, Product Review »

[29 Feb 2012 | No Comment | 2,257 views]
Angle Eyes Ballast broken?

I already use the Angle eyes in my headlamp.
in one day, the angle eyes cannot turn on, i check every connection no problem, and i think that the ballast is not working.
but it’s difficult to find the same ballast like previous one (black color).

So, i try to find, and i looking in motorclye shop who sell lamp. And i found ballast that use to turn on angle eyes in motorcyle (blue color). cost is more than half if compare with the prevoius ballast.
i get and idea to use that ballast …

4-Wheel Automotive, Do It Your Self (DIY) - Risk will be your own, Product Review »

[28 Feb 2012 | No Comment | 3,767 views]
Meyle HD arm installed in e46

I just bought the Meyle HD arm to replace my old arm in e46. When driving the sound of the moving link is annoying me.  After i search information, and it come to Meyle HD arm.

You can see my old arm is not in good condition, and we can see  the ball joint also broken.

And we can side by side old arm, and the Meyle HD arm.

Base on the information this arm is more suitable for the rough road condition, and another thing is the ball joint can be replaceable, …

4-Wheel Automotive, Do It Your Self (DIY) - Risk will be your own, Product Review »

[28 Feb 2012 | No Comment | 2,182 views]
Install Anti Roll-Bar powerflex bushing in e46

I just want to renew my bushing in the anti roll-bar front side of e46.
so i already buy the powerflex bushing to replace the standard one.
1.  Of course you have to buy powerflex bushing for anti roll bar base on your car specification.

2.  Please prepare and park your car on the appropriate place. And jack your car.  after that release the front tire.

3.  You can see the anti-roll bar from side.

4.  You have to take out the stabilizer link to make it easy and can clean your anti roll bar.

5.  Release the …

4-Wheel Automotive, Do It Your Self (DIY) - Risk will be your own, Featured, Performance, Product Review »

[28 Feb 2012 | No Comment | 1,965 views]
Install i-drive II throttle control in 318i e46n46

I just got this thing, and i try to install it by myself.
this is the step:
1.  Of course you have to prepare the i-drive II throttle control.

2.  we must take out the paddle throttle to connect the wiring with the i-drive II.

3.  After you can take out the paddle, disconnect the terminal from the throttle paddle, and make connection with i-drive II module.  and you need to connect with the power source 12V to make the connection can active.

4.  Make sure when you …

4-Wheel Automotive, Do It Your Self (DIY) - Risk will be your own, Featured, Product Review »

[28 Feb 2012 | No Comment | 3,117 views]
Turn Light Bulb – Osram Diadem

As we know the standard bulb for common turn light is Orange.
I just buy the Osram Diadem bulb for turn light, as physically it looks white/like clear when it turn off.

but when it turn on it become orange.  So this is still as turn light standard color.

For this Osram Diadem, is more to cosmetic of the car, so it looks white from outside if we see it, and it looks more nice to see over all. ( base on my opinion)

Hope you enjoy it!!!

4-Wheel Automotive, Featured, Product Review »

[28 Feb 2012 | No Comment | 1,801 views]
OBC Stalk Installed in 318i e46n46

In 318i e46n46, as a standard, don’t equipt with this OBC stalk.  Only regular stalk that use as turning light, dim.

What is the difference of this OBC stalk,
If we installed this OBC stalk into 318i e46n46, you can get additional function, like outside temperature, your fuel consumsption in L/100KM.

This OBC stalk is standar for the 325i 2002.  So you can buy the used one, ( but check first the condition). and install it in you n46.

For this installment you should go to authorized service BMW, because it need to be actived by …

Carburetor Motorcycle, Product Review »

[27 Feb 2012 | No Comment | 2,470 views]
Carburettor Honda Tiger

Honda tiger carburettor is one of carburettor to be explore..

It has many feature inside.
1.  It has 26mm for diametre
2. It has injector pump

3. It has air cut valve

4. Shape of the venturi ovale

We will discuss one by one.
If we see the carburattor of Honda Tiger, we will see it big and tall, if we compare with common carburrator.

4-Wheel Automotive, Do It Your Self (DIY) - Risk will be your own, Featured, Product Review »

[27 Feb 2012 | No Comment | 1,697 views]
How To install Ring Speedometer in e46

For the standard speedometer for e46 is with no ring speedometer.
If you want to modified to use ring speedometer, here is the way to do it.
1.  Prepare the ring speedometer and tools to open it.
2.  Open the top of speedometer
3.  Pull the top part out
4.  Just pull the speedometer, and disconnect the cable connection from it
5.  Put the speedometer on a safe place, we don’t want to have it scratch.
6 .  Put face down, and you will see the backside of speedometer.
7.  open the screw, and you pull out the backside
8. …