Home » Archive

Articles in the Featured Category

4-Wheel Automotive, Do It Your Self (DIY) - Risk will be your own, Featured, Headline, Others »

[8 Mar 2013 | No Comment | 2,721 views]
Your Canceller for HID is broken? Let’s Fixed it.

I just buy the canceller for HID, this canceller need because of in my E46(mostly Europe cars), it will trigger the warning light in speedometer dashboard due to the power consumption of HID use 35Watt.  While in original bulb it use 55Watt.
Due to this difference,  it trigger the warning light to turn on.  They think it like the bulb broken.
So, after several months use, this canceller is broken.  So, the light will also turn off.   Actually, you can buy it new one, but for me i would like to …

4-Wheel Automotive, Do It Your Self (DIY) - Risk will be your own, Featured, Headline, Performance, Product Review »

[24 Feb 2013 | No Comment | 4,981 views]
Swirl Effect “Black Edition” series.

Dear All,
 
after previous explanation on Swirl effect device topic, so i can say it for this “Black Edition” series is smart inovation in creating swirl effect more better.  This “Black Edition” physically  more longer, if compare with prevoius version.
 
what i feel after i install this black edition, some improvement you can feel directly.
1.  Boost more feel in below 2,000 rpm. around 1,800 rpm.
2.  Fell the 2nd boost in 2,400 rpm.  This boost you can feel more bigger.
3.  And above 2,400 you can feel the acceleration much better.  in every rpm …

2-Wheel Automotive, Do It Your Self (DIY) - Risk will be your own, Electrical Motorcyle, Featured, Headline, Product Review »

[28 Jan 2013 | No Comment | 19,523 views]
How To Install “Yamaha Vixion” Left Handle Switch in to “Honda CB150R”.

Currently,
all new motorcyle already equipt with “Automatic Headlamp On”, and mostly call it AHO.
This is good for safety reason, but somehow when we ride on night, near neighboorhood, it can make trouble.
So, i just try to utilize “Yamaha Vixion” Left swicth that  have Lamp switch can be turn on/off.
Next i will share some simple add to turn on/off city lamp utilize “Yamaha Vixion” Switch that already have inside.
but it only work for front city lamp, for back city lamp it also can be done, but need long cable to connect.
So …

2-Wheel Automotive, Featured, Headline, Uncategorized »

[30 Dec 2012 | No Comment | 3,162 views]
Honda CB150R

Dear All,
 
Just want to share what information that i can share about this motorcycle.
This motorcyle is base on CBR150 machine with some modification.  DOHC, 150cc, Injection.
 

 

 

 
Air Filter:
 
I just want to show how it looks

 
This is Inside

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
So i have Pivot Voltage Stabilizer, so install it on this motorcyle.

 
 
Later i will update this information,
Hope it help you…

4-Wheel Automotive, Featured, Headline, Performance »

[28 Apr 2012 | No Comment | 2,344 views]
Installing Swirl effect

I just installing device to make swirl effect after the butterfly.
why after butterfly? because most of after market install it before butterfly throttle that make the effect of swirl is not maximize.
Installing is very easy  because it just attach after the throttle body and before the plenum chamber.

Installing is not difficult.
After install it, first impression give the throttle respond  better than standard.
some note i feel, from 2,400 rpm – i feel some boost,
some report from who is install they also feel the reduce in power consumption.
this is the picture that …

4-Wheel Automotive, Do It Your Self (DIY) - Risk will be your own, Featured, Product Review »

[29 Feb 2012 | No Comment | 2,269 views]
Angle Eyes Ballast broken?

I already use the Angle eyes in my headlamp.
in one day, the angle eyes cannot turn on, i check every connection no problem, and i think that the ballast is not working.
but it’s difficult to find the same ballast like previous one (black color).

So, i try to find, and i looking in motorclye shop who sell lamp. And i found ballast that use to turn on angle eyes in motorcyle (blue color). cost is more than half if compare with the prevoius ballast.
i get and idea to use that ballast …

4-Wheel Automotive, Do It Your Self (DIY) - Risk will be your own, Featured, Performance, Product Review »

[28 Feb 2012 | No Comment | 1,979 views]
Install i-drive II throttle control in 318i e46n46

I just got this thing, and i try to install it by myself.
this is the step:
1.  Of course you have to prepare the i-drive II throttle control.

2.  we must take out the paddle throttle to connect the wiring with the i-drive II.

3.  After you can take out the paddle, disconnect the terminal from the throttle paddle, and make connection with i-drive II module.  and you need to connect with the power source 12V to make the connection can active.

4.  Make sure when you …

4-Wheel Automotive, Do It Your Self (DIY) - Risk will be your own, Featured, Product Review »

[28 Feb 2012 | No Comment | 3,155 views]
Turn Light Bulb – Osram Diadem

As we know the standard bulb for common turn light is Orange.
I just buy the Osram Diadem bulb for turn light, as physically it looks white/like clear when it turn off.

but when it turn on it become orange.  So this is still as turn light standard color.

For this Osram Diadem, is more to cosmetic of the car, so it looks white from outside if we see it, and it looks more nice to see over all. ( base on my opinion)

Hope you enjoy it!!!

4-Wheel Automotive, Featured, Product Review »

[28 Feb 2012 | No Comment | 1,839 views]
OBC Stalk Installed in 318i e46n46

In 318i e46n46, as a standard, don’t equipt with this OBC stalk.  Only regular stalk that use as turning light, dim.

What is the difference of this OBC stalk,
If we installed this OBC stalk into 318i e46n46, you can get additional function, like outside temperature, your fuel consumsption in L/100KM.

This OBC stalk is standar for the 325i 2002.  So you can buy the used one, ( but check first the condition). and install it in you n46.

For this installment you should go to authorized service BMW, because it need to be actived by …

4-Wheel Automotive, Do It Your Self (DIY) - Risk will be your own, Featured, Product Review »

[27 Feb 2012 | No Comment | 1,722 views]
How To install Ring Speedometer in e46

For the standard speedometer for e46 is with no ring speedometer.
If you want to modified to use ring speedometer, here is the way to do it.
1.  Prepare the ring speedometer and tools to open it.
2.  Open the top of speedometer
3.  Pull the top part out
4.  Just pull the speedometer, and disconnect the cable connection from it
5.  Put the speedometer on a safe place, we don’t want to have it scratch.
6 .  Put face down, and you will see the backside of speedometer.
7.  open the screw, and you pull out the backside
8. …